FR-9D47ƒ/2.8 · 1/125 · ISO 400Roll /gear-industry
Leaked Video Points to November 24 Release for Nikon ZR Firmware 2.00
A YouTube leak relayed by Nikon Rumors points to November 24 for Nikon ZR firmware 2.00, bringing Log3G10 for H.265 and five other production features Nikon has confirmed.
Processing notes
- Leaked release date of November 24 for Nikon ZR firmware 2.00, via Nikon Rumors and YouTuber Mr Camera
- Nikon officially committed to releasing firmware 2.00 before the end of the year
- Firmware 2.00 adds Log3G10 gamma for H.265, removing the need for RAW files to access RED color science
- Additional confirmed features: selectable High ISO NR, control customization, focus peaking for RED RAW, 3D LUT on HDMI output, reduced low-light flicker
- Feature list is official; the specific date remains an unverified leak
A leaked date of November 24 has surfaced for Nikon's first major ZR firmware update, according to a report by Nikon Rumors citing a YouTube video from French creator Mr Camera. The date appears at the end of the video and, if accurate, lands within the release window Nikon itself committed to in its November press release: before the end of the year.
Nikon confirmed in September that the firmware was in development and detailed its contents at the start of November, but the company has never named an official day. Treat November 24, then, as an unverified leak rather than a shipped commitment — Nikon has not confirmed it.
What does firmware 2.00 actually contain?
The headline item for working video shooters is Log3G10 gamma support for H.265 recording. This matters because it grants access to RED's color science without shooting RAW video files. The practical effect is twofold: memory card storage requirements drop, and editing systems face a lighter workload in post. For shooters billing client work on card capacity and turnaround time, that is a direct workflow and cost change, not a marketing line.
Beyond Log3G10, Nikon has specified five additional improvements in firmware 2.00:
- Selectable High ISO noise reduction levels
- Enhanced control customization
- Focus peaking during RED RAW video recording
- 3D LUT (look-up table) application to HDMI output
- Reduced flicker in low-light conditions
Each of these targets production friction. Selectable noise reduction gives stills shooters finer control over high-ISO output; HDMI LUT application lets external monitors display a graded preview on set; low-light flicker reduction addresses a known pain point in artificial lighting.
Should professionals update on day one?
The mechanism here is routine but worth restating: a firmware update rewrites the camera's internal software, and a failed or buggy update can take a body out of commission during a paid job. The standard practice is to know the update procedure before starting and to wait a short period after release so early teething problems surface on other people's cameras first.
That caution applies with extra weight to the ZR, since firmware 2.00 is the camera's first major update and touches video pipeline fundamentals. Shooters with RED RAW or H.265 workflows scheduled near the rumored date may want to hold existing configurations until reports from early adopters confirm stability.
Rumor versus record
The distinction to keep straight: the feature list is official, published by Nikon in its November press release. The November 24 date is not. It comes from a single YouTube video relayed by Nikon Rumors, and it simply tracks plausibly with Nikon's stated end-of-year deadline.
If the leak holds, ZR owners gain Log3G10 and the accompanying production tools before the holiday scheduling season. If it slips, Nikon's own commitment still binds the company to shipping firmware 2.00 before December 31 — a window now measured in weeks either way.
via digitalcameraworld.com (Source)
More from Amara Osei
Show full bio
Market editor covering companies, deals and strategy in professional photography industry at Photo Trade Wire.
129 articles



